According to the different materials used for the main stressed bars of photovoltaic supports, they can be divided into aluminum alloy supports, steel supports and non-metallic supports, of which non-metallic supports are rarely used, while aluminum alloy supports and steel supports have their own characteristics.

The currently recommended one is the fixed tilt angle aluminum photovoltaic mounting system. Generally, technicians will first calculate the local optimal installation angle according to site longitude and latitude, and then all arrays will be fixed and installed with this angle. Of course, when the land area is limited, in order to achieve a certain installed capacity, sometimes the best inclination will be abandoned. The power generation efficiency of the optimum inclination angle and the power generation efficiency of the non-optimum inclination angle do not have a double relationship.

According to the size of the project and the land conditions, it can be used with ground piles or concrete base as the foundation. If the ground pile is selected, the installer needs to take samples on site for pulling force test to ensure that the selected size can meet the strength requirements.

As a PV enterprise, Lipu Metal has been focusing on the R&D, production and sales of solar mounting system and PV frames. Due to Lipu Metal has a professional design and development team, so it has obtained nearly 17 domestic and foreign product patents so far. Professional production and QC team, which is strictly controlling the quality from raw materials to finished products accordance with the ISO9001 international quality system standards.

Lipu Metal can not only produce conventional PV mounting system products and accessories, but also can offer the design which will meet the customized needs. According to the situation of different projects, Lipu Metal will provide matched mounting system solutions. From the beginning of purchasing from Lipu Metal, customers can enjoy a series of supporting services, including field investigation, measurement & calculation, design, installation support and after-sales service.

Technical specification

Installation place	Cement roof or flat ground
Fixed way	Ground screw/Concrete base
Installation angle	5°~45°
Standard wind	35m/s
Max wind	88m/s
Max snow	1200mm
Design standard	JISC 8955:2017,GB 50009-2012,GB 50797-2012
Main material	AL6005-T5
Fastener material	SUS 304

Advantage
Strong compatibility

High cost performance

High-strength aluminum

Easy to install

Project Photo reference

About LP Solar
• Lipu Metal (Jiangyin) Co., Ltd was previously called Leapton Metal (Suzhou) Co., Ltd before;
• November 30th, 2018, Lipu Metal (Jiangyin) established, the factory was relocated from Suzhou to Jiangyin;
• The new factory covers an area of about 21,300 square meters;
• The annual capacity of 500MW for mounting system and 500MW for aluminum frames;
• Lipu Metal has obtained 17 product patents so far.

About Factory