Concrete Ground Aluminium Solar Mounting Structure 88m/S PV Systems

Aluminum Ground Mounting System Solar Power Station Solar Photovoltaic System

Aluminum Ground Mount System has various types according to the condition of certain site place and customers' special requirements. Pre-installed has been arranged before leaving the factory, so it is easy to install and can save labor cost on site.

The main material of the system is high-strength aluminum, and bolts are all stainless-steel, so the anti-corrosion and self-recovery effect is very good, especially suit for island countries, such as Japan, Philippines.

The aluminum ground mount structure can match different base, for example ground screw, pile or concrete foundation. It also can used on flat ground or little slop ground. The array can be placed 2*n vertically, 3*n, 4*n horizontally, or larger arrays can also be done, but the difficulty of construction also needs to be considered when selecting the array. If the height of the upper end of the module is particularly high, the construction on site will be very difficult. The selection of span depends on the parameters of wind load and snow load of the project site. Through calculation, we can get the number of foundations. Of course, in the process of design, we also need to consider the situation of land as much as possible. If the customer can provide soil report and foundation test report, LP SOLAR engineer team can provide a more accurate design.

Technical Data

Installation steps

1. Pile installation	2. Foudation installation	3. Beam installation
4. Rail installation	5. Panel installation	6. Complete

Aluminum Ground Mount System Components

Photo	Item No	Name	Product type	Product line
	G0000F/R	Column unit	Racking	MGA
	31L0000A	Beam	Racking	MGA
	44L0000A	Rail 65	Racking	MGA
	5ZL0000A	Rear tie	Racking	MGA
	A351	Clip	Racking	MGA
	A735	End clamp	Racking	ALL
	A835	Mid clamp	Racking	ALL