Tilt Mount consist of a kit of Tilt Legs, rails and hardware for attaching to the rails. Different height can have different angle, the normal angle range is 10~15 degree, 15~30 degree and 30~60 degree. The large angle adjustable range enables customers to select the optimal installation angle according to the site’s longitude and latitude, so as to obtain better power generation.

For reference, when the inclination angle increases from horizontal (0 °) to the optimal inclination angle, the radiation received by its surface increases correspondingly, and the maximum radiation is received when the optimal inclination angle is reached; as the tilt angle continues to increase, the radiation received by its surface begins to decrease, and the corresponding power generation gradually decreases. When the inclination angle is within ± 5 ° of the optimal inclination angle, the influence of radiation on power generation is relatively small.

The Tilt Mounts are mainly made of aluminum and stainless steel components, which can ensure complete corrosion resistance. Tilt Mount is mostly used on the side of the metal roof not facing the sun, fix together with clamp or fix with the roof directly with tapping screw. Sometimes it also used on the concrete roof.

Technical Data

Product Name	Tilt Mount
Application	Metal roof or flat roof
Material	High grade aluminum and A2-70 hardware
Wind Load	Max 88 M/S
Snow Load	Max 1.5 KN/M²
Applicable Module	Framed or Frameless
Module Orientation	Portrait or Landscape
Standard	JISC8955:2017,GB50009-2012,GB50797-2012
Dimensions	Customized
Warranty	10 Years
Work life	25 Years

Installation steps

1. Tilt leg installation	2. Rail installation	3. Panel installation

Metal Roof Mount System Components

Photo	Item No	Name	Product type	Product line
	LP-TL	Tilt leg	Clamps	MRA2
	49L0000A	Rail 50	Racking	MRA
	AC02	Rail 50 joiner	Racking	MRA
	A735	Mid clamp	Racking	All
	A835	End clamp	Racking	All
	H6WL0000S	Earthing plate	Earthing	MRA
	ED02	Earthing lug	Earthing	MRA